ADI 19X DRIVER DOWNLOAD
|Date Added:||25 July 2016|
|File Size:||35.85 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Fireface UFX Aadi of production! The display is not only used to control the 19c, but also shows warning and guidance messages. Aiming for the absolute reference sound, any detail in the ADI-2 Pro is special and has its own story. Balanced Phones mode As before, but: Digiface Out of production! The two, fully separated stereo headphone outputs deliver the same dBA SNR performance as the line outputs, for a full hum and noise free listening experience.
ADI | FOUR INSULATED CONDUCTORS: 16 AWG (19 X 29) BARE
sdi A low power mode and a high power mode are provided, for a perfect match from IEM up to planar. Multiface II Out of production! Having two stereo outputs, balanced headphone operation is possible.
The only capacitors in the signal path perform DC protection at the analog input sockets, and have been carefully selected to avoid any sonic impact. Advanced Remote Out of production! Fireface Out of production!
RME’s engineers therefore designed a new headphone output stage that brings the full performance of the premium DAC to the phone jack – even when using low impedance headphones. Xdi Out of production!
BOB Out of production! Two premium DACs are used for two separate stereo outputs. There is no use in boasting about dB THD, when such values are not available in real world operation – for example when a 32 ohm headphone is connected. As RME’s engineers were not satisfied with the existing techniques they developed a new Advanced Balanced mode for the ADI-2 Pro, that removes most limitations of standard balanced operation, and turns this mode into a a fully new experience.
Basic Remote Out of production!
With the tech specs basically identical to the silver ADI-2 Pro, the AE comes decked out in an all-black housing, matching the style of audiophile-level HiFi setups.
ADI® Seg Finger Bit Dekton, 19 x 25mm, 1/2″ Gas
THD is far below dB 0. OctaMic D Out of production! The 4-channel AD-converter, supporting kHz sample rate and DSD recording, is used in a dual mono design, with 3 dB improved signal to noise ratio. The whole analog circuit design is fully symmetrical and balanced throughout – and DC-coupled.
The Extreme Power design excels with 0. Babyface Out of production! Internal power supply stages and precise regulators use a super-low-noise design to not degrade performance through the power rails. Including an external switched power supply with lockable connector, the ADI-2 Pro can be easily powered from battery, opening up mobile applications as well as galvanically isolated use cases. The Extreme Power design also incorporates current avi, power surveillance, overload detection adu DC protection.
RME: ADI-2 Pro Anniversary Edition
Fireface TCO Out of production! Power supply for ADI-2 Pro. The exclusive Advanced Balanced mode delivers a balanced signal path from the DAC straight to the phone, with 3 dB gain in Signal to Noise Ratio, smoothed out deviations in components, optimized frequency response, super low output impedance wdi.