ASUS DRW-1608P3S FIRMWARE DRIVER

By admin No comments

By default the drive’s jumper comes set to master. More information on these features can be found in our review of the CRWA. By looking at the picture below you can see the drive’s IDE interface, power connector and analog audio output connector. Of course you can’t do this with just any drive, media or software. This program queries the drive to see what its reading and writing capabilities are. Once you’ve created your LightScribe label, you’re ready to print it. The results are shown below.

Uploader: Nikoll
Date Added: 28 April 2009
File Size: 6.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45552
Price: Free* [*Free Regsitration Required]

This “BUSY” indicator lights up green whenever the drive is reading or writing. In this review we’ll just go over some of the basics and see how the DRWBL performs with the bundled software. According to HP, it’s as simple as burning the data, flipping the disc, and then burning the label. Keep in mind this option not only changes the level of detail, it affects the amount of time it takes to print the label.

Most of the specs below have been taken from ASUS’s website and the manual that came with the drive. However, at the time of this review, the list of ass software is still relatively short.

DRWP3S | ASUS Global

This buffer is also backed up by some form of buffer underrun protection. When testing the drive’s capacity I found that the drive was able to overburn up to This means that the drive’s region is stored in the firmware.

  ACTIVIDENTITY LINUX DRIVER DOWNLOAD

This means that the drive’s region is stored in the firmware. In both cases, the quality has been set to “best”. Next to the jumper block is the analog audio connector. For this review the drive’s firmware has been updated to version 1.

This greatly reduces compatibility problems, especially with older DVD players. Unfortunately, a patched RPC-1 firmware is not available for this drive yet. Starting from the left of the IDE connection you’ll see the jumper switch for master, slave and cable select.

Using the bundled software you can both create and burn LightScribe disc labels. Next to the jumper block is the analog audio connector. According to Nero, the drive can write CD-Text and overburn. Most major software companies have pledged support for the technology. By looking at the picture below you can see the drive’s IDE interface, power connector and analog audio output connector.

– Features – ASUS DRWBL 16x DVD±RW/RAM – Reviews

Off by default, this LED drw-16083s up green when the drive is reading or writing. While there are a few slight differences, all three drives share the same basic design and have many of the same logos. By looking at the picture below you can see the drive’s IDE interface, power connector and audio output connectors. According to Nero, the drive can also write CD-Text and overburn.

  LOGITECH WEB CAMERA V-UBQ42 DRIVER

Here is a screen shot from Nero’s InfoTool. For this review we used firmware versions 1.

By default the drive’s jumper comes set to master. The higher aeus quality, the longer the process will take. How long does it take to print a label?

Top user review

The drive’s region can be changed five times and after that it cannot be changed anymore. Most of the specs below have been taken from ASUS’s website firmdare the manual that came with the drive. More information on these features can be found in our review of the CRWA. The results are shown below.

Firmwwre LightScribe capable drives use the same laser when burning both the data and label, they have to be able to accurately control the laser’s focus and position as well as the spindle speed.

Use it at your own risk.